About Us | Contact Us | Shipping & Payment | Warranty & Return
Camera Batteries
Home » Canon Camera Battery » Canon PowerShot SD200 Camera Battery

Replacement For Canon PowerShot SD200 Camera Battery

This Canon PowerShot SD200 Battery has been precision-engineered and rigorously tested for capacity, voltage, compatibility and safety to exceed original equipment manufacturer specifications. The quality of this is certified as well by TUV,RoHS and the CE to name a few.You can rest assured of purchase.

Canon PowerShot SD200 Camera Battery

3.7v 1400mah For Canon PowerShot SD200 Battery

  • Org. Price:$52.67
  • Sale Price:$16.99
  • Contact Phone Number:
  • Popularity :

Replacement For Canon PowerShot SD200 Camera Battery Technical Specs

This Camera Battery Can Fit Below Canon Battery's Part Numbers

  • NB-4L

This Camera Battery Can Be Used Below Canon models

  • Digital IXUS 100 IS
  • Digital IXUS 110 IS
  • Digital IXUS 120 IS
  • Digital IXUS 30
  • Digital IXUS 40
  • Digital IXUS 50
  • Digital IXUS 55
  • Digital IXUS 60
  • Digital IXUS 65
  • Digital IXUS 70
  • Digital IXUS 75
  • DIGITAL IXUS 80 IS
  • Digital IXUS i Zoom
  • Digital IXUS i7 Zoom
  • Digital IXUS WIRELESS
  • IXUS 130
  • IXY 210 IS
  • IXY 510 IS
  • IXY DIGITAL 10
  • IXY Digital 40
  • IXY Digital 50
  • IXY Digital 55
  • IXY Digital 60
  • IXY Digital 70
  • IXY Digital 80
  • IXY DIGITAL 90
  • IXY Digital L3
  • IXY Digital L4
  • IXY Digital WIRELESS
  • PowerShot SD1000
  • PowerShot SD1100 IS
  • PowerShot SD1400 IS
  • PowerShot SD200
  • PowerShot SD30
  • PowerShot SD300
  • PowerShot SD40
  • PowerShot SD400
  • PowerShot SD430 WIRELESS
  • PowerShot SD450
  • PowerShot SD600
  • PowerShot SD630
  • PowerShot SD750
  • PowerShot SD780 IS
  • PowerShot SD940 IS
  • PowerShot SD960 IS
  • PowerShot TX1

Camera Battery Notice:

  • 1.Battery Storage - If you don't use the battery for a long period, store it in a clean, dry, cool place away from heat and metal objects. The batteries will self-discharge during storage; remember stored at about 40% state-of-charge.
  • 2.Exercise Your Battery - Do not leave your battery dormant for long periods of time. We recommend using the battery at least once every two to three weeks. If a battery has not been used for a long period of time, perform the new battery break in procedure described above.
  • 3.Keep Your battery Clean - It's a good idea to clean dirty battery contacts with a soft,clean and dry cloth. This helps maintain a good connection between the battery and your portable device.
  • 4.Breaking In New Batteries - new battery comes in a discharged condition and must be fully charged before use. It is recommended that you fully charge and discharge your new battery two to four times to allow it to reach its maximum rated capacity.
  • 5.Do not short-circuit. A short-circuit may cause severe damage to the battery.
  • 6.It is normal for a battery to become hot during charging and discharging.
  • 7.Most battery can be fully charged in about 3 hours so do not leave a battery in a charger for a long time. Do not charged to higher voltages than its threshold voltage
  • 8.Do not drop, hit or otherwise abuse the battery as this may result in the exposure of the cell contents, which are corrosive.

Batteries Care Instructions:

  • Your new battery comes in a discharged condition and must be charged before use (refer to your computer manual for charging instructions). Upon initial use (or after a prolonged storage period) the battery may require three to four charge/discharge cycles before achieving maximum capacity
  • When charging the battery for the first time your computer may indicate that charging is complete after just 10 or 15 minutes. This is a normal phenomenon with rechargeable batteries. Simply remove the battery from the computer and repeat the charging procedure.
  • It is important to condition (fully discharge and then fully charge) the camera battery every two to three weeks. Failure to do so may significantly shorten the battery's life (this does not apply to Li-Ion batteries, which do not require conditioning). To discharge, simply run your device under the battery's power until it shuts down or until you get a low battery warning. Then recharge the battery as instructed in your user's manual.
  • If your digital camera battery will not be in use for a month or longer, it is recommended that it be removed from the device and stored in a cool, dry, clean place.
  • It is normal for a battery to become warm during charging and discharging.
  • The milliamp-hour (mAH) rating of camera battery will often be higher than the one on your original battery. A higher mAH rating is indicative of a longer lasting (higher capacity) battery and will not cause any incompatibilities. In most cases, outperform the original by 30% to 50%.
  • Actual battery run-time depends upon the power demands made by the equipment. In the case of notebook computers, the use of the monitor, the hard drive and other peripherals results in an additional drain upon the battery, effectively reducing the battery's run-time. The total run-time of the battery is also heavily dependent upon the design of the equipment. To ensure maximum performance of the battery, optimize your computer's power management features. Refer to your computer manual for further instructions.